Zurn Zerk-Cpm Aquasense E-Z Flush® Retrofit Kit With Metal Cover, Chrome

They all have been working fine so far. There is an issue with installation. The rear of the unit sticks out to far to the right and rubs tight against the plumbing tightening nut. Luckily we just managed to get it on, but it pushes up against it pretty tight on a few.

They all have been working fine so far. There is an issue with installation. The rear of the unit sticks out to far to the right and rubs tight against the plumbing tightening nut. Luckily we just managed to get it on, but it pushes up against it pretty tight on a few.

They all have been working fine so far. There is an issue with installation. The rear of the unit sticks out to far to the right and rubs tight against the plumbing tightening nut. Luckily we just managed to get it on, but it pushes up against it pretty tight on a few.

They all have been working fine so far. There is an issue with installation. The rear of the unit sticks out to far to the right and rubs tight against the plumbing tightening nut. Luckily we just managed to get it on, but it pushes up against it pretty tight on a few.

Placed this in a part of our yard that floods with heavy rain. Today, rain level reached 2" above bottom of this device but, it never switched on. Piece of junk. Returning. Update: Keeping this little workhorse after all. Turns out it just needed to be placed flat on bare ground to work. It was pumping dirt and water out a 3 ft. discharge due to being placed on bare soil but, it removed all the water after a rainfall of 1.55" in an hour. The unit was overwhelmed with keeping up with that amount of rainfall in such a short time however, it eventually removed every bit of water in the flooded yard. I was actually exchanging it with another identical one but, have decided to keep both and run when a heavy rainfall is expected. By the way, easy to clean by just back flushing through the discharge with a garden hose.

When you step up to the Brizo faucet you get the best cartridge on the market. It has much more brass than the regular Delta faucets by far. It is just as easy to install and set the temperature. It also has a much higher price. The ceramic disc last much longer