Taco 007-F5-7IFC Cast Iron Circulator Pump with Integral Flow Check

(9 reviews)
Estimate Shipping Time: 5 Days

Sold by:
Inhouse product

Price:
$139.99 /pc

Quantity:

Total Price:
Refund:
Share:
This fits your .
  • Make sure this fits by entering your model number.
  • Casing O-Ring: 008-005RP - Flange Gasket Set: 007-007RP
  • Capacitor or PC Board: 007-002RP - Cartridge Assembly Complete: 007-042RP
  • Standard High Capacity Output Compact Design - Quiet, Efficient Operation
  • Unique Replaceable Cartridge Design-Field Serviceable - Direct Drive-Low Power Consumption
  • This product runs using a 0.04 (1/25) horsepower motor
    • introduction

      04-04-2023

      I have this pump installed in a hole in the yard. I dug the hole as that portion of the yard floods due to slope. I dropped this pump in a large bucket, sunk it in the hole and ran a 50 foot hose off of it. The pump works like a charm! Has an auto shut-off feature once the water level is below pump base. I leave the pump out through spring, summer and fall in WI. I do remove, clean and store for the winter and take my chances with early winter rains. Any other other fix is a huge undertaking and $$$$. For now this pump is saving the day.

    • KoolTy

      04-04-2023

      Great water saver. Non-failing flushes makes for sanitary surroundings. Entire assembly is an easy install.

    • KoolTy

      04-04-2023

      Great water saver. Non-failing flushes makes for sanitary surroundings. Entire assembly is an easy install.

    • Wotifra

      05-04-2023

      We have used many of these Zurn kits to replace manual flush handles. Even non-plumbers can easily install them in just a matter of about 5 minutes each. Some of them may need to be adjusted so the sensor does not activate when you open a stall door, but even that is a simple matter.

    • Wotifra

      05-04-2023

      We have used many of these Zurn kits to replace manual flush handles. Even non-plumbers can easily install them in just a matter of about 5 minutes each. Some of them may need to be adjusted so the sensor does not activate when you open a stall door, but even that is a simple matter.

    • Wotifra

      05-04-2023

      We have used many of these Zurn kits to replace manual flush handles. Even non-plumbers can easily install them in just a matter of about 5 minutes each. Some of them may need to be adjusted so the sensor does not activate when you open a stall door, but even that is a simple matter.

    • portion

      05-04-2023

      I marked easy to install which it was for me, might not be for people who have never replaced one of these. It replaced a 22 year old pump.

    • Lwcl9GvA

      06-04-2023

      Great shower so far. For those with heat issues, if your water supply is very cold it may not heat it up enough. I've had to run it on winter mode which appears to use an extra set of burners due to the very cold water temps of the supply. Comes with propane tape and hose adapter making it contain everything except the wrenches. Highly recommend it.

    • Lwcl9GvA

      06-04-2023

      Great shower so far. For those with heat issues, if your water supply is very cold it may not heat it up enough. I've had to run it on winter mode which appears to use an extra set of burners due to the very cold water temps of the supply. Comes with propane tape and hose adapter making it contain everything except the wrenches. Highly recommend it.

    Product Queries (0)

    Login or Registerto submit your questions to seller

    Other Questions

    No none asked to seller yet