MIG Welder 140Amp Flux Core Welder 110V/220V Dual Voltage MIG/ARC 2 in 1 Welding Machine IGBT Inverter Portable Welder

It doesn't come with spool, so I had to get that separately. I plugged it into a 20A outlet, and no issues. It welds 1/4inch steel plates without any problems. The flux core wire does tend to splatter a bit more than normal stuff, but it cleans up fine with a wire brush. I'm happy with it.

Fairly low duty cycle, but that is fine. Am only going to give it light usage.

Fairly low duty cycle, but that is fine. Am only going to give it light usage.

TTCxfEzXpEvMCGF9pyFeaAyjMJzY6LVm3A

TVWj43gdjjxAD38ZLBmtZCbtsDAfUKQcpR

TX1DYLLo8qRdwUXyJmoAn35QvedhKJoFyZ

TJSg7svEaMqd9yjW3gGytxRS6qQ6zCMYJ7

TEse3QuXunFu4u7WFvXrEUX3dREt4CYhPh

TWMadEEqZXT1DGrfp6TQgCRukxsuBNPDeD

TTgScjXZR2CZ6Kj4VRxzsXnZEiprvy9iu4

THm17HdJzX7jN5zCGhb2a9HuCfTyEfFieh

TXmsUgVDuBzMNgPRWhgYVEEncQDNr9DhYC

TCXnmGBVNkNWQYrEe4m2pAoKdRnzUMXqmU

TV1ZnFhzH8szxGBUxjxdRr5p8bzded8GxE

TZDfxMBqEaR9nEifmH7fRWJZfYC2NnUJ7Z

TSPn59D1uURfRsts9QrDiyoHGpJxdDZNHc

TR9kwtyUsL3TPfxez4dFtgeBucMcRbzofV

TJQYJ6zFoGizjbyLsR9g9xYdhh5gwD84tk

TWWiDjmBFsSJUv7oWaWU97k9NQ8cdJwKFD

TAZX3fGvhVbZoSYk3RkrStq4Hu9c4Dx7jR

TKFGbVvpuVipqB78HKkZU8FZZniHoYh8r5

TFj4GrL84CgmXucUp8tQDrm7DxxQspvnzn

TUpCfhnygA2npCNGbYEf4SmKaTxBniYTnY

TTig8fCoATg8LDEBpfo5szGywhoiEattzL

Works well and love the ability to control heat. It has a lot of different tips that come with the solder iron. When replacing Surface Mount Devices (SMD), it is good to use the hot air gun and use of the air speed so as not to blow the SMD device off the board trying to solder. I added a holder for the solder spools (from a bathroom toilet tissue holder) and used a magnet to hold the base to the top of the station. Well worth the money, especially when working on SMDs.

Works well and love the ability to control heat. It has a lot of different tips that come with the solder iron. When replacing Surface Mount Devices (SMD), it is good to use the hot air gun and use of the air speed so as not to blow the SMD device off the board trying to solder. I added a holder for the solder spools (from a bathroom toilet tissue holder) and used a magnet to hold the base to the top of the station. Well worth the money, especially when working on SMDs.